Recent content by Peter.baw

Yes you can fill using hand pump.. its not so difficult when I setup the regulator for this gun I had to fill it loads of times and I mean a lot lol... one thing I did notice and this restricted what I could and couldn't do to setup the gun. I tried to put a softer valve spring in the gun...

Hi, I just wanted to update on final results i think this is a good as i am going to get :) Acupell Accupell.FT 2.2 14.66gr Shot count: 85 Low: 536 FPS Hi: 594 FPS Avg: 580 FPS Spread: 58 FPS STD Dev: 10.9 FPS Start of 180 Bar fill 13-Sep-2024 20:12:22,566,FPS,10.4,FT Lbs, 13-Sep-2024...

Hi All, Firstly many thanks to all of you for your help with this :) When I get home I will send all test in fps as I saved them all on excel sheet. Regulator was defiantly not set at 90 like I thought it was, so I did test turning the regulator down 10Bar then turning it down again another...

Test done very odd :-( below done with reg set at 90Bar I think

Thanks for all the advice, i am going to do a test tonight and update the results this was set at 90 at least i had the sense to measure before i changed it, also this has markers so i know roughly what the reg is at for every marker hopefully. Pete

Logun MK1 2.2 be aware the gun now has a breath hole, when you say "susceptible to creep" do you mean the regulator could move? I am going to do the tests in the link... But the only way I can do this now is to open the regulator all the way out. to simulate it not having one in would this work...

HI, I need some help please, with regulator issue. Note: I have put a new regulator in the gun as I messed the old one up. The issue I am having, is I recently re anodised the gun back to black yes it had a lot of changes So obviously I had to take the gun apart, as I have done lots of times...

See below... worth a shot and it saved me doing loads of screen shot's too.... as stated only do below if your sure what to do. I would try this option first once you know the drive is showing on Computer Management window in my first post, 2. Gain Permissions to Access Denied USB Drive Can you...

Good advice, I hope he gets the data back the main thing is does the drive show if so there is hope.... they have nothing to lose at this point permission's are changed if need be... assuming they don't want or cant pay to have the data recovered As you say it's expensive... Me, as soon as they...

HI, Try this go to search and type control, it should show control panel hit enter, change view in the top right to large. Look for Administrative tools... open this now go to Computer Management open this... now go to Disk Management... Can you see the USB drive in this windows See below as...

Pink and gold did not really work out too well.... each to is own as they say it should have gone red...

Hi, all done, it's different if nothing else.....

following my last post see attached the learning curve wow once you get the hang of anodising it's doable for small parts ye pretty simple. The problem starts when you get to larger parts / more surface area to do. When i get the time i will update on what i did wrong and what worked. For now...

The clue should have been in your name :-) either way very nice even more so knowing you made them yourself.... This part is bothering me now :-( as i must dip them in acid to anadise them again, I take it, this will be ok as it adding a coating not stripping it off? Pete "Only one comment...

I tricky to be honest.... Me personally I like the chrome look it just a pain to keep clean, as I said I am going to try a small part first? but I do like the gold and black too, the problem I have is what ever is done it's staying that way. I don't want to risk, stripping the coating of again...