Snowpeak ap900 looks nice for the money

joe average said:
is there any chance of a photo showing the position of the screws , just to give a rough idea please
Click to expand...
I've found, it's only the silver one which changed things..

The one just behind the trigger post is for the trigger spring, so no real news to touch this one.

The rear mist s rew is the trigger stop point, if wound in too far this could stop the trigger working but should effect anything id it's too far out.

The front one adjusts he 1st stage trigger length.

The AP rifles have a single stage trigger that is made to feel like a two stage trigger....
It's the silver screw which does this.
 
Here you go Joe
IMG_0927.webp
 
Dear collective. I have tried to fit an HW moderator on my AP900 cylinder version but the cylinder stops it going on fully. Could members tell me how they managed to swap the original moderator out for a more efficient one please? 👍
 
Hanibal said:
Dear collective. I have tried to fit an HW moderator on my AP900 cylinder version but the cylinder stops it going on fully. Could members tell me how they managed to swap the original moderator out for a more efficient one please? 👍
Click to expand...
I have fitted the moderator from my Hw100KT to my Ap900, at least have bought another HW100KT moderator and fitted it to my AP900. Is that what you mean?
 
Sunstoner said:
I have fitted the moderator from my Hw100KT to my Ap900, at least have bought another HW100KT moderator and fitted it to my AP900. Is that what you mean?
Click to expand...
My mod doesn't clear the end of the cylinder so only screws half way on. Do I need an adapter to give me the clearance? 👍
 
Yes, something like that but looking at other rifles shown on this thread, they dont appear to have one like the one in the link
 
Sunstoner said:
Got my AP900 a couple of weeks ago from Vector Air and loving the it but I've a question, im a relative newbie to air guns, only picked up my very first air rifle 6mnths ago so the answer may well be me.....

Went to the local range and despite a full mag, the AP900 did 2 blank shots, i.e. pulled trigger and nothing happened. is this just normal or could it be something Im doing wrong?

*when I say nothing happened, I mean it felt like a normal trigger pull, its just no pellet came out*

Admittedly, my HW100KT has never done this.

Interestingly, I was at the range with my nephew who was trying out his new Snowpeake PR900 which uses the same magazines and his did it too. Infact both our rifles did it a couple of times enough for my nephew to lose a bit of confidence in his new rifle.

Any ideas? my nephew was trying out his first rifle which he got only 1 week ago. Hes under my instruction so its possibly something Im screwing up for us both
🤔
Click to expand...
One of my original mags does that too.
Have not looked into it but probably something with the ratched?
Now I have a great working Maple mag, plus two also superb Carm mags.
They work without any fuzz.
 
You must log in or register to reply here.
Back
Top