Hi all, I have a Wolverine r leaking from the barrel, I am assuming this is the valve stem or valve seat, could anyone concur with my thoughts, I am going to order them as a pair if that's the problem, cheers Mark.
-
the Daily hi thread
Wolverine R leak
- Thread starter maw1
- Start date
Sounds like the valve seat seal or debris on it stopping it sealing. Get a new one from DS, clean well and make sure you put it in the right way around.
daystate.com
Daystate Valve Seat Seal - genuine factory seal for PCP air rifle
Daystate Valve Seat Seal - genuine factory part for the Red Wolf, Wolverine, Huntsman, AirWolf and Air Ranger PCP air rifles. State serial no. with order
daystate.com
ThanksSounds like the valve seat seal or debris on it stopping it sealing. Get a new one from DS, clean well and make sure you put it in the right way around.
Daystate Valve Seat Seal - genuine factory seal for PCP air rifle
Daystate Valve Seat Seal - genuine factory part for the Red Wolf, Wolverine, Huntsman, AirWolf and Air Ranger PCP air rifles. State serial no. with order
Might just be the O ring which is a BS111 NBR70. You'll need the right keys to get it open. They're available on Ebay, our member @Fishy-Steve makes these excellent keys and that's what I use. Very straightforward, the Sub 12 boys I believe have done a YouTube video covering it.
Is that the one around the valve seat, I have already stripped it down.
Yes mate. Some of the Daystate kits oy contain a polyurethane one, so I'd just get a couple off a reputable dealer on ebay like bearingshopuk.
Thanks, much appreciated.
I've done a fair few so if you get any issues feel free to message me.