-
the Daily hi thread
Tuning hw45
- Thread starter GrizzlyGriff
- Start date
Have you seen these @Gat Man ? Might be a better shout to run something tried and tested before going custom?
Tuning Spring guide Fit To Weihrauch HW45 11.70mm | Eaglevisioncam
This are High Quality low tolerance Spring guider made by CNC. Fit to Weihrauch: Weihrauch HW45 11.70mm Our spring number: 15 and titan numbs: 8 spring Lots of other spring guider kit coming soon. Material: heavy duty black nylon. Life time guarantee (original purchaser only). Before...eaglevisioncam.com
ATB
UJ
KB87
Super member
Vector optics frenzy with the adaptor from here
Weihrauch HW45 Accessories
I love shooting my HW45s, but was struggling to find red dots that fit properly on the 13mm Dovetail Rail and would take the forward recoil of a HW45. I started producing and sizing my own adaptors to solve this problem and have picked a selection of quality Red Dots that have been tried and...
premium-quality-air-rifle-accessories.ecwid.com
GrizzlyGriff
Busy member
Same as above 
I'm specifically looking for a way to get two equal length guides without losing any weight/mass
Andy H
Super member
sorry for high jacking this thread
Would anyone know the size of the two O-rings used in the HW45 one for the Breech Seal and the other for the Transfer Port Seal.
i have had a look about and the only size i can fined on a US site is a 009 is this a BS009? the TP seal i cannot fined any size for.
any help on this would be much appreciated.
Would anyone know the size of the two O-rings used in the HW45 one for the Breech Seal and the other for the Transfer Port Seal.
i have had a look about and the only size i can fined on a US site is a 009 is this a BS009? the TP seal i cannot fined any size for.
any help on this would be much appreciated.
I didn't know there were two o rings on my 45?
Shows how much attention I really pay.....but isn't the breech and transfer port seal the same thing?
*edit* well you live and learn eh
One is hidden under the allen bolt in front of the hammer is what it looks like on the schematics
Shows how much attention I really pay.....but isn't the breech and transfer port seal the same thing?
*edit* well you live and learn eh
One is hidden under the allen bolt in front of the hammer is what it looks like on the schematics
Lloyd90
Proactive member
Anywhere the Ozzie seals are in stock?
mattmiles1989
Proactive member
Ebay has the oz seals
mattmiles1989
Proactive member
WEIHRAUCH HW 25 45 PISTON SEAL 22MM QUALITY CNC MACHINED AIR RIFLE GUN PISTOL | eBay
2X WEIHRAUCH HW 25 45 PISTON SEAL. WEIHRAUCH HW 25 45 PISTON SEAL. CAN BE USED FOR 22mm CYLINDER CONVERSION. QUALITY CNC MACHINED UNKIKE THE HARD PTFE FACTORY SEAL SEE LAST PHOTO.
www.ebay.co.uk
WelshWilly
Super member
Or you could try one of mine
www.woodfield-gcp.co.uk
£39.00 inc delivery to forum members 
Contact me on here or for a faster reply on my e-mail address woodfield-gcp2017@talktalk.net
Will.
Welsh Willy HW45 / Beeman P1 Kit — Woodfield-GCP
Welsh Willy’s HW45 Service Kit HW45 Tuning Kit consists of :- Pre-cut Spring Delrin Spring Guide Brass Top Hat Delrin Power – Bands Delrin Slip-washers Spring Grease Instructions Smoother power, less recoil, better accuracy down range Also available choice with or without piston seal
www.woodfield-gcp.co.uk
Contact me on here or for a faster reply on my e-mail address woodfield-gcp2017@talktalk.net
Will.
Wadcutter
Member Extraordinaire
Weihrauch HW45/HW25 'Ozzy Seals' Piston Seal
Crafted from a new, high-performance purple material infused with molybdenum disulfide and permanently lubricated, this piston seal for the Weihrauch HW 25 45 boasts 1.5 times the lifespan of its predecessor in red. With a robust rating of up to 1000 bar, it ensures durability and reliability...
www.apexairguns.com
Lloyd90
Proactive member
Weihrauch HW45/HW25 'Ozzy Seals' Piston Seal
Crafted from a new, high-performance purple material infused with molybdenum disulfide and permanently lubricated, this piston seal for the Weihrauch HW 25 45 boasts 1.5 times the lifespan of its predecessor in red. With a robust rating of up to 1000 bar, it ensures durability and reliability...
They’re out of stock
Gat Man,
Got a Vector Optics Frenzy red-dot on mine.
Have fun
Best regards
Russ
What size dot?
Lloyd90
Proactive member
Or you could try one of mine
£39.00 inc delivery to forum membersWelsh Willy HW45 / Beeman P1 Kit — Woodfield-GCP
Welsh Willy’s HW45 Service Kit HW45 Tuning Kit consists of :- Pre-cut Spring Delrin Spring Guide Brass Top Hat Delrin Power – Bands Delrin Slip-washers Spring Grease Instructions Smoother power, less recoil, better accuracy down range Also available choice with or without piston seal
Contact me on here or for a faster reply on my e-mail address woodfield-gcp2017@talktalk.net
Will.
How much with the pistol seal also? Is it similar to the Ozzie seal?
53£
Wadcutter
Member Extraordinaire
Daft question; when stripping the HW45, is there a side to knock the pins out from ?
They are so stubborn I'm worried I'm going to damage the pistol trying to get them out.
They are so stubborn I'm worried I'm going to damage the pistol trying to get them out.
Which pin?