Snowpeak AP900 customisation

[Michael B]

I am awaiting the delivery of a 0.22 Snowpeak AP900 and I'm planning to customise it. I'd be interested in sharing experiences and links to resources if anyone would like to contribute. Ill be using a Hawke Airmax 30 Touch 3-12x32 AMX IR Rifle Scope (Model 13260) and a weihrauch xl moderator and walnut stock components with a left-hand cheek. Estimate weight uner three kilos:

• Standard AP900 rifle: ~1,600 g
• Hawke Airmax 3-12×32 scope: ~572 g
• Weihrauch XL moderator (195 mm): ~193–200 g
• Walnut components: adding estimated extra 500g after removing existing components

Mocked-up image of current project is shown below this stock image :

 

[Michael B]

Black version by boiling stock parts and grip, "These are made one at a time by submerging the cheek-piece and handrail in black disperse dyes, direct surfactants, acids, salt and acetone for 50 minutes at 90°c. They are continually stirred to avoid uneven finishes. The finish is permanent and will not rub off. "

 

[Michael B]

Resource notes from Chat GPT on custom Snowpeak AP900 builds resources:

Examples of Custom Stocks and Mods

• AR-15 Component Swaps: The rear section of the factory stock is removable and can be replaced with standard AR-style rear stocks. Users have noted that it is a solid platform with less flex than some competitors like the
  Kral NP03
  .
• 3D Printed Bullpup Kits: Files exist on platforms like Cults3D for "
  EIGHT AP900
  " and "
  MONTIRO AP900
  " kits, which allow users to convert the rifle into a bullpup configuration.
• Professional 3D Design (Ruben3D): A well-known Spanish creator, Ruben3D, produces high-quality 3D-printed modifications specifically for the
  AP900
  , including competition-style grips, stocks, and barrel Picatinny rails.
• Community "Stealth" Builds: Members of the AirGun Forums have documented "Stealth AP900" projects, which involve custom-fitted moderators, modified hammer springs, and adjusted triggers alongside stock refinements to improve the rifle's tactical feel.
• Accessory Rails: Many owners add 3D-printed or aftermarket Picatinny rails to the front underside for mounting bipods and other accessories not present on the standard folding stock.

Where to Find More

• Design Files: Search for "
  AP900
  " or "AP1000" on Yeggi or Cults3D to find printable stock kits.
• Community Forums: The "Show us your custom/modded AP900’s" thread on AirGun Forums is a primary hub for visual examples and technical advice.

 

[Myatto]

I am awaiting the delivery of a 0.22 Snowpeak AP900 and I'm planning to customise it. I'd be interested in sharing experiences and links to resources if anyone would like to contribute. Ill be using a Hawke Airmax 30 Touch 3-12x32 AMX IR Rifle Scope (Model 13260) and a weihrauch xl moderator and walnut stock components with a left-hand cheek. Estimate weight uner three kilos:

• Standard AP900 rifle: ~1,600 g
• Hawke Airmax 3-12×32 scope: ~572 g
• Weihrauch XL moderator (195 mm): ~193–200 g
• Walnut components: adding estimated extra 500g after removing existing components

Mocked-up image of current project is shown below this stock image :View attachment 879992View attachment 879996That looks like a great design, I would never have thought of Walnut, I'm looking forward to your photos after .. brilliant

 

[valevelo]

There's already a huge thread running with customisation and tuning tips/tricks

https://airgunforums.co.uk/threads/snowpeak-ap900-looks-nice-for-the-money.169442/

 

[Bren]

I RIT dyed my plastics, took about 2 mins, also tried out a few other grips and stocks, but ended up putting the factory parts back on and fitting a Spina 2.5-10x32sfir scope

 

[Michael B]

How is the RIT dye holding up?

 

[Michael B]

I hope that the flat components of the vented area can be made up with a folded single piece of walnut so the grain flows round. Ive steamed and laminated walnut like that before

 

[Tophat57]

There's plenty of scope for customisation with this great little gun. Mine has:

Weihrauch XL silencer
Various picatinny rail sections
Vertical handgrip (with a QD picatinny fitting to allow swapping to a bipod)
Eagle vision picatinny to ARCA rail adaptor (for use with either a tripod or flatbag)
Ares M4 Type 'D' grip. (An airsoft part for a gas rifle rather than en electric one. Electric rifs have a wider frame fitting).
Silverback polymer stock and steel hinge set. (Again and airsoft part)
Picatinny sling point
As well as the ATN X Sight 5 scope and IR illuminator

All functional, and for a purpose. Using good quality airsoft parts for grips, stocks, rails etc. is perfectly OK with a non-recoiling PCP rifle.

And as a rabbit / ratting tool it really is a great little bit of kit.

 

[Michael B]

ive added a few simple mods....Ive extended the barrel and shroud by 38mm so I can fit a Weihrauch XL silencer (and still fill the reservoir) and extended the stock 25mm by adding a rail between the stock and the gun; it seems simpler than adding a bigger shoulder pad . For my size thats more comfortable,

 

[Tophat57]

ive added a few simple mods....Ive extended the barrel and shroud by 38mm so I can fit a Weihrauch XL silencer (and still fill the reservoir) and extended the stock 25mm by adding a rail between the stock and the gun; it seems simpler than adding a bigger shoulder pad . For my size thats more comfortable,

How'd you extend the barrel? New barrel machined to spec to suit?

 

[Michael B]

How'd you extend the barrel? New barrel machined to spec to suit?

i bought a 38mm extension for the barrel ...about a tenner and it works really well. I also bought a section of 500mm carbon tube from Ebay and cut it to fit....that wasnt so easy to do the the equipment i have available

 

[Zenduri]

Watching this thread. I love the wood stock vibe on your mockup and if i do bite the bullet on one of these it's peaked my interest

 

[denmorr]

I RIT dyed my plastics, took about 2 mins, also tried out a few other grips and stocks, but ended up putting the factory parts back on and fitting a Spina 2.5-10x32sfir scope

View attachment 880094

View attachment 880095

Can you please provide a link for the after market rear stock in your first photo.

Thnx in advance

 

[Bill.B]

i bought a 38mm extension for the barrel ...about a tenner and it works really well. I also bought a section of 500mm carbon tube from Ebay and cut it to fit....that wasnt so easy to do the the equipment i have available

How did you get the rifling to match up, and where/how did you attach such a small extension? I've never heard of a 38mm barrel extension.

 

[Bren]

Can you please provide a link for the after market rear stock in your first photo.

Thnx in advance

It’s a 5ku St6 stock with a Magpul Moe buttstock

5KU ST-6 M4 Stock Tube with 1913 Rail Folding Mechanism.

5KU ST-6 M4 Stock Tube with 1913 Rail Folding Mechanism.

www.firesupport.uk

 

[denmorr]

the butt bit is great where did u source that from

 

[Bren]

Magpul parts are easily available. I would look at Crawley Surplus Store or any other Airsoft shop

 

[Averageplinker]

How did you get the rifling to match up, and where/how did you attach such a small extension? I've never heard of a 38mm barrel extension. View attachment 961720

I doubt it extends the barrel in the dense you are thinking of. Just extends it cosmetically I would imagine.