thunker
Proactive member
Haven't got a clue about the stuff. Will be needing it for a mod 100 x 50 size. Would like dull black colour. Any pointers on best option and possible link most welcome.
Thanks..
Thanks..
-
the Daily hi thread
Shrink wrap !!!
- Thread starter thunker
- Start date
Titleist T100
Super member
do you mean heat shrink ?
heat shrink tubing for sale | eBay
Find great deals on eBay for heat shrink tubing. Shop with confidence.
www.ebay.co.uk
Fishing rod heat shrink is one option if they do it that size.
Φ15-50mm Diameter Non-Slip Heat Shrink X-Tube Wrap Fishing Rod Handle Grips | eBay UK
Textured Non Slip Heat Shrink Tubing. do to fix any issues till you satisfied. Multiple Size and Colors Selectable (get what you selected ). Length0.2M/0.5M/1M/2M/5M Selectable (get what you selected ),Longest 1M Pre-Cut.
www.ebay.co.uk
Titleist T100
Super member
we used it a lot in cable jointing etc, I wouldn't recommend the one with glue in it as you will never get it off if required.
Whispering Walter
Super member
Polyolefin heat shrink tubing is available from electrical factors at that size. Just beware of choosing the right shrinkage. Generally available in 3:1 and 2:1 shrink ratio. Don't shrink it with a naked flame, use either boiled water out a kettle or a hot air gun (not an FX!).Haven't got a clue about the stuff. Will be needing it for a mod 100 x 50 size. Would like dull black colour. Any pointers on best option and possible link most welcome.
Thanks..
thunker
Proactive member
I should of mentioned that i,d like it plain and im thinking as rubbery as poss would give the best sound absorption....Not sure if it comes in different thicknesses or if it would matter that much.. Dont suppose weight would come into it really.
Whispering Walter
Super member
I'm sure a shrunk cylinder of tubing at 100 x 50mm the weight would be negligible. Probably the same for sound absorption although you could trap an even wound layer of non-absorbent material around your mod which would probably make an interesting finish on the heat shrink. The matt black tubing would look good.
Blindmanjake
Well-known member
Could you vinyl wrap it?
How about inner tube if you want rubbery feel
You sure you don’t have a fetish ha ha
Only joking mate
Cheers
thunker
Proactive member
WANTED , HARLEY INNER TUBE...
Oh yes
Had an apprentice put his hand through a piece of 3M cold shrink, that was interesting in the first aid room
1260engineer
Member Extraordinaire
I have some big stuff at work 
I will have a look in the morning chap
I will have a look in the morning chap thunker
Proactive member
That would be a huge help.. Thank you sirI have some big stuff at work
1260engineer
Member Extraordinaire
I used a section of bicycle inner tube on an old mod, nice matt rubber finish, just got to find the right fit.Haven't got a clue about the stuff. Will be needing it for a mod 100 x 50 size. Would like dull black colour. Any pointers on best option and possible link most welcome.
Thanks..
If you want it permanent then use the heat shrink tubing with the glue lining the inside.
Taping a bare paintball tank vs the one covered with heat shrink tubing with my nail, I notice a more dull sound, not sure if this information is of any help with sound reduction.
Taping a bare paintball tank vs the one covered with heat shrink tubing with my nail, I notice a more dull sound, not sure if this information is of any help with sound reduction.
Attachments
1260engineer
Member Extraordinaire
Ive had a look in my stocks at work mate . I have 40mm to hand .
Sorry mate .
Sorry mate .