Show us your HFT500 and stock idea's

[Jim carlin]

This is my first AA HFT500, apart from the butt plate and the longer cheek riser post, the rifle itself is completely un-fettled.

 

[Davemp]

@deleted member made me a custom back drafted shroud and biathlon lever for mine, whisper quiet and no effect on accuracy

 

[GrahamHenderson]

Huma regulator, 400mm cylinder, lightweight hammer, JT331 hammer spring, 3.5mm port, threaded barrel, MPR-FT stock and trigger blade, 11ft.lb, reg @ 66Bar, .. and a lot of work on the 2 stage trigger!

 

[flyfisher]

what is the shot count on it bud?

 

[GrahamHenderson]

@flyfisher , .. 124, but the reg is slow to refill when the cylinder pressure is less than 100bar

 

[flyfisher]

thanks mate, that is a good shot count for that, got a 400 with a Huma in it and do get about 100 shots but got the reg, at about 100 bar so might be an idea to drop it down to what yours is,

 

[zx6fighter]

Reg'd, ported, lightened hammer. Shed built stock.

Shoots sweet

 

[Jim carlin]

Stock looks great for a home build!!!

 

[kenny019245]

hft500 beautiful gun i have one and never will i part with it and a big thumbs up for the shed built stock excellent job there

 

[SNCO]

Still learning and adjusting my HFT500 after swapping from a HW100. But do love shooting with her!

 

[zx6fighter]

Got another one, this one's in a MPR stock

 

[Anchutz]

My HFT500 in air arms tactical stock with an airmax 4-12 × 44. Almost 1kg lighter than the laminate. Used for HFT off sticks.
A very accurate gun.

 

[Two200's]

Some beauties on this thread.

Here's mine, set up for HFT

SWFA scope, Warren Edwards Hamster, Custom Stock, Rowan Trigger, Bisleyish Butt - 3D printed one dismantled itself.

Inside, it's boggo standido - doesn't require assistance yet.

 

[Two200's]

Reg'd, ported, lightened hammer. Shed built stock.

Shoots sweet

View attachment 706096

Don't think I've got any tools in my shed which could make a Stock like that one...

 

[gdavison]

My HFT500 in air arms tactical stock with an airmax 4-12 × 44. Almost 1kg lighter than the laminate. Used for HFT off sticks.
A very accurate gun.

That looks great .. I have been wondering what a HFT500 looks like in the AA tactical stock.. Any one considering a ACZ Aeron for a AA rifle really needs to look at the tactical offering now. The new PRS offering is a consideration too now

 

[Bearded Sniper]

@deleted member made me a custom back drafted shroud and biathlon lever for mine, whisper quiet and no effect on accuracy View attachment 700133View attachment 700134View attachment 700135View attachment 700136View attachment 700137View attachment 700138

Looks tidy with the shroud on!
Recognise those lanes

 

[Mad Andy]

 

[P8X]

Not much going off here
Bog standard rifle with tilly hamster

 

[markyboy]

Custom left handed orange and black stock i made for my shooting buddy

I have the same colour on my Daystate Redwolf cylinder conversion.

 

[Hrh]

Here’s mine with a few mods. Still tempted to send to rat works for a reg and internal tinker. Loving the shround