Reximex lyra movement

[Johnjohn890]

As in title the stock as some movement in it
Checked the fixing screws and there all up tight but it seems to be just that little bit of slack between the stock and cylinder
Any one else had or have the same issue and what did you do to solve it
Was thinking of packing it a little between the stock and cylinder or just tapering both together but don't want it to look out of place

 

[TargetShootingman]

If the stock screws are tight, a thin rubber or plastic shim between the stock and cylinder is the neatest fix. Avoid tape, as it looks untidy and isn't a permanent solution.

 

[Dave120uk]

If the stock screws are tight, a thin rubber or plastic shim between the stock and cylinder is the neatest fix. Avoid tape, as it looks untidy and isn't a permanent solution.

Agree with this a plastic shim or thin bit of rubber will sort the problem out.

 

[Johnjohn890]

Cheers for this, will take a look at ASAP cheers again

 

[JTAG]

Yes mate same problem with mine, the single fixing screw from stock to action allows it to rotate left and right in the stock, as above a little bit of neoprene sorted it out for me.