NP02 stock on Puncker K

[Tomsk999]

Bit of a random one peeps

I’m thinking of making a custom folding stock for a Kral Puncher K

Rather than butchering the OE stock I’d like to start with a clean slate and keep the original stock

The NP02 stock looks like a good starting point if it by chance mounts up to the Puncher K

Any one have any experience and by chance tried it?

Cheers all , Tony

 

[Baboon]

It should mount up to the puncher k no problem there and possibly get something 3d printed to fit a foldable stock too as you would have the space from the bottle adapter not being there.

Only thing I can think of being how you would affix it to the npo2 stock as i don't know if all the kral blocks have the 2 screw holes for retain the bottle adapter

 

[Tomsk999]

Thanks for that , I have a 3d printer so should be able to sort something at the rear.

As long as I can get the stock to marry up with the puncher K and the stock mounting point lines up I’ll hopefully be able to wing the rest and make up a folding stock carrier that I can affix to the rear of the stock somehow

Thanks for your help

 

[32:1]

Hicap folds or the np03 might modify

 

[Tomsk999]

I did also look at the Np03. All up for investigation at the moment .

I think it would make a great compact rifle but I would want to do it as OEM looking as possible .

 

[Fatbob 59]

There's lots of aftermarket folding stocks available that fit to a picatinny rail so once you scheme a rail mounted to the block any of them will fit , search Airsoft websites

 

[Tomsk999]

I may have to get the np02 block I imagine . Or I may just make one

 

[Baboon]

You could probably get away with drilling and tapping your existing block or possibly bagnall n Kirkwood might have one in like £80ish for a block if I rememberd correctly but if going to a no02 block you'd need a new cocking dog pin as they are a little bit shorter

 

[Tomsk999]

The back of the block does have the holes for the cylinder adapter so I’ll have to make up an adapter plate so I can attach a picatinny rail to it

I may also have to shorten the rear of the stock a little so the foldable butt will be able to fold around the end of it

Ofcourse I’ll need to drill out for the pressure gauge too

As long as the stock sits against the bottom of the block , the cyclinder and the safety and cocking lever hopefully I’ll be able to sort the rest

Thanks all

 

[Tomsk999]

Anyone thats thinking of doing this it doesnt look like it will work and im now the proud owner of a NP-02 new stock thats of no use lol

The block is the right shape but the trigger assembly on the puncher K is too far back and actually sits over the grip.

Unless there is a way of moving the trigger assembly forward in the block its a no go, you also have to bore out a hole for the presseure guage but thats a reasonably easy fix.

 

[Baboon]

It's still possible I completely forgot about the trigger placement being different not my pic but that's how they are set up on the no02 would get better pics but in a air bnb at the moment.
So you'll need the no02 trigger and trigger block I'm not sure if you'd need one of the np02 Sears too

 

[Tomsk999]

Thanks for posting the image , looks like I’m out of luck then as I’ve not got or wouldn’t have a clue what other parts I’d need .

 

[Baboon]

I can see if I can find them and send you the links if you would like, also could you check the bottom of the block to see if there's 2 screw holes either side of the trigger Sears

 

[Tomsk999]

Hiya, Yes the holes are there. Here are some images, thanks for your help, hopefully there might be some hope yet