Magazine cases

S

Sandman

Proactive member
Joined
Dec 14, 2023
Messages
90
Reaction score
1,556
Location
Nottinghamshire
Hi guys magazine storage
What do you keep your magazine in
Just to keep clean and safe when transporting
About or when not in use , just looking for options and ideas 👍🏽
 
Sandman said:
Hi guys magazine storage
What do you keep your magazine in
Just to keep clean and safe when transporting
About or when not in use , just looking for options and ideas 👍🏽
Click to expand...
I've recently been using one of those hard camera case things with the tear out square foam inside. I've got one that's about 12 inches and have my mags, pellet safe, pard battrries, torch and thermal in there. Very handy piece of kit.
 
Made this for my Umarex magazines.

IMGP0077.JPG
 
Busy 3D printing cases for my Dreamline and Kral Empire magazines.

Dreamline version holds two, Kral version holds three.
Lids hinge on bolts, and close with magnets.
Size is perfect to keep in a pocket when out in the field.

That is usually enough for any single hunting session and aligns well with a single fill shot count for both rifles.
 
Never bothered with the 3d cases myself, partly because they're quite expensive for what they are and partly because I like to keep everything together to avoid things being forgotten on my range visits.

Wilko tackle box for me, cost about £3 and holds mags for all my rifles, fill probes, shims, allen keys, spare o-rings etc.
I dremelled some of the dividers out to make space for longer bits (probes, allen keys).
1733825619194.png
 
I bought the 3 little bags for electricians from C. K. Each one contains mags and fill probe for each of my pcps. Comes with a little carabiner to clip to rifle slip or just chuck in pocket so you know you have everything you need for that gun when you go shooting 👍 Got mine from epic tools TicToc shop so no postage
 

Attachments

  • Screenshot_20241210-170438.webp
    Screenshot_20241210-170438.webp
    98 KB · Views: 12
Forgot to say that they are clear on the back so you can see what's inside without tipping it all out
 
For one rifle I have a three magazine 3d printed case.
Another I have two 3d printed cases, each case holds two.
For my Brocock S6 I use a foam lined pellets tin, that will hold seven mags.
 
I use these cases … small mesh section to hold the probe ..
Either round / which is also perfect .177 pellet tin size or can just about get a .22 Hobby tin in.
Or
The oblong
Easily available from the AliX etc … and cheap too
B886090B-21B8-486B-B365-362CA7061270.webp
DF7932C2-ED96-4DB8-A58F-88765E8D544D.webp
EF71E85B-3C3E-4B99-9504-36E828B15FD3.webp
 
There are many choices of colours and some slightly more rounded than flat ….👍🏻👍🏻
 
You must log in or register to reply here.
Back
Top