• the Daily hi thread just say hi :)
  • please everyone if you have a question and get given a possibe solution if it works please update your thread as it may help others.

Kral Puncher Jumbo Male Fill Port

Hidehunter

Hidehunter

Super member
Joined
Jul 7, 2022
Messages
443
Reaction score
778
Location
Newton le willows
Hi everyone,can anybody point me in the right direction on where to buy the sealing washer that sits inside the male
fill conector on the gun.
I have been in touch with the importers and they dont have any in stock, and i am loath to spend £30.00 on a complete kit.
I have tried a normal fill port but its very difficult to fill it up, and i dont want to modify the stock.

TIA
 
Here is the part that's the problem, it is the small seal on the shaft which i cant seem to buy anywhere and the dealers will
not sell the male fill part that sits in the block.
20230905_091916.webp
 
It’s basically as new
I swapped my jumbo out for a foster …. Less than a month old ….To fall in-line with my others and the whip on my bottle.
Kept the old fitting
Have just dug it out and unscrewed the necessary…… and

image.jpg

You are local mate so I can drop it off if that helps ? 👍🏻

I also have these …
image.webp
so worth a try 👍🏻 And you may then have spares 👍🏻
Pm me and we can sort it … 👍🏻
 
Last edited:
Degs said:
It’s basically as new
I swapped my jumbo out for a foster …. Less than a month old ….To fall in-line with my others and the whip on my bottle.
Kept the old fitting
Have just dug it out and unscrewed the necessary…… and

View attachment 301046

You are local mate so I can drop it off if that helps ? 👍🏻

I also have these …
View attachment 301056
so worth a try 👍🏻 And you may then have spares 👍🏻
Pm me and we can sort it … 👍🏻
Click to expand...
Hi buddy having a nightmare, my Benjamin Akela valve o ring has gone. Won’t allow air into the cylinder. Where did you get them o ring please, they look the same size that came off mine. Wanting to buy a complete make quick connect but can’t source any anywhere.

Thanks mark
 

Attachments

  • 6901CBF4-EEBE-4934-837B-39DBCCFB2032.webp
    6901CBF4-EEBE-4934-837B-39DBCCFB2032.webp
    66.1 KB · Views: 11
interestingly, in both pics, look at the damage the ball bearings in the female part of the coupler have done to the shoulder on the male part :rolleyes:
 
Hi Mark
Maybe someone (akela owner)can guide you to the correct size you need … ?

Guessing on them looking the same on a pic isn’t really an option.
If you have the old one even if it’s damaged … then there’s something to work off ?
Am happy to mooch through my collection if you want to send me your old one ??? … and see if we can come up with something 👍🏻
 
the male fitting will likely be M10 as opposed to 1/8 bsp, have a chat with best fittings;)
 
Degs said:
Hi Mark
Maybe someone (akela owner)can guide you to the correct size you need … ?

Guessing on them looking the same on a pic isn’t really an option.
If you have the old one even if it’s damaged … then there’s something to work off ?
Am happy to mooch through my collection if you want to send me your old one ??? … and see if we can come up with something 👍🏻
Click to expand...
Your a gent, I’ll wait to see what best fittings say first but much appreciated your a gent cheers
 
You must log in or register to reply here.
Back
Top