Hatsan AT44

J

Jordan B

New member
Joined
Jan 7, 2025
Messages
3
Reaction score
0
Location
Sheffield
Hi,

Just looking for some advice and possible valuation. I have a Hatsan AT44 10 .22 with a Hill pump. I think it also may need new seals.

Could anyone recommend where the best place is to sell and what it could be worth? It also has a NIKKO scope but I don’t think this is worth anything.

Thank you.
 

Attachments

  • image.webp
    image.webp
    1 MB · Views: 78
  • image.webp
    image.webp
    275.8 KB · Views: 47
As you may know you need to meet the sales criteria for here .

There is other forums with a sales section with less restrictions if you want to get sales access quicker . One I believes only 5 posts .

There is trigger Traders https://www.triggertraders.com/
Gunstar and guntrader but I would not use guntrader due to the morals.

Valuation . No idea.

Welcome to the forum.
 
I paid £225 for mine about a year ago.
No sight or pump but came with a gun slip/factory silencer.
I've just had a quick Google,a Solware ad shows them at £399.
There was an ad in the wanted section a while back.Maybe it was @Gixxer ?
Maybe they can give a better idea of price.
Sorry if it was not you. Gixxer
 
Thank you both for the reply, I will have a look into gunstar for a sale, do you think it would be sensible to sell for £400 with scope and pump bearing in mind the seals have gone?
 
Jordan B said:
Thank you both for the reply, I will have a look into gunstar for a sale, do you think it would be sensible to sell for £400 with scope and pump bearing in mind the seals have gone?
Click to expand...
Probably nearer 150-200 quid all in. With dead seals a good one will struggle to top 300 scoped with accessories . Only bonus would be if it had an lw barrel fitted at the factory, some did.
I've had 3 of them so some experience .
 
Pegasus said:
Ok,thanks 👍
I will have a look at mine 👍
Click to expand...
Doesnt matter what barrel it has, it's all down t9 how accurate it is . Found my .22s were very accurate and not fussy but my .177 would only shoot crosman well but again was silly accurate with them
 
My .22 likes Hades👍
I agree with the accuracy..
A high spec for a relatively cheap rifle..👍
 
Only ever seen real 1 lw barrel on a at44not produced using old lw machinery in the Hatsan factory after lw upgraded. Earliest barrels were hatsan.made however I believe the steel is German
That barrel did have the name etched into barrel itself.

Image of serial number on block will give us d.o.m .
Value hard to say could be 150/200 for the rifle.
Pump no idea .

Seem to be a bit more accurate single shot as mags seem to effect consistent accuracy.
I believe yours is a earlier model as has 2 barrel bands.

Never found mine too pellet fussy but are not pellet on pellet like others I shoot.
Still like some of hatsans stuff .got a bit of hatsan love as always need work to improve them to something half decent so floats my boat
 
If it has an LW barrel it is stamped near the breach end.
Only one I've had with a LW barrel was a .25
 
I may have misread this, but is the air rifle working okay and the Hills pump has knackered seals? If the rifle is fully functional, depending upon how many magazines you have with it, maybe £230-250. The Hills pump, if it's non-functional, won't be worth much to most people ( bear in mind cheap Chinese pumps can be picked up for under £50). Looking at the photo, it's an older model AT44, as the stock has no cheek riser. The serial No. will give you year of manufacture.
 
CapitalBee said:
I may have misread this, but is the air rifle working okay and the Hills pump has knackered seals? If the rifle is fully functional, depending upon how many magazines you have with it, maybe £230-250. The Hills pump, if it's non-functional, won't be worth much to most people ( bear in mind cheap Chinese pumps can be picked up for under £50). Looking at the photo, it's an older model AT44, as the stock has no cheek riser. The serial No. will give you year of manufacture.
Click to expand...
I think the seals have gone on the gun but the pump is working fine, I have 2 magazines with it. I have attached a photo of the serial number.
IMG_6308.jpeg
 
Try unscrewing the cylinder out of the action on mine I can do it with rifle complete but take off the moderator ,on the opposite end of the tube from the filler the valve rod will be poking through just tap it gently a few times then try filling it,if it’s you can get any air in it put the tube in a bucket off of water and watch for the bubbles,I’ve done it loads of times on at44 ,hope it helps.
 
You must log in or register to reply here.
Back
Top