Living_Shinigami
Busy member
Hi all,
Wasn't sure where to post this but I have recently come across something that is going to help massively on the AGF BR20. I want to preface this with I am not affiliated nor have I been asked to do this. It will be a completely honest review.
I have struggled for ages to find an A4 card holding target that is:
- Functional
- Hard-wearing
- Relatively inexpensive
- Available
At my local range, they have some A4 targets that you can borrow but they are rarely available this time of year with the number of Taster Sessions and Duke of Edinburgh Award shooters they get used for.
I've been searching all over the forums and various retailers trying to find something that doesn't cater to only 14cm or 17cm, and doesn't cost the earth until I stumbled across Gr8Fun Targets. I ordered one of their double A4 target holders and it recently came well packaged and very quickly.
First impressions were that the retail packaging it came in was a bit pants and it didn't come with any tools for assembly. But seeing as the outer packaging was sturdy and safe and the tools needed are very simple and should really be lying around everyone's home somewhere, I endeavoured.
The metalwork is of a good standard and the parts went together without a hitch. Except... one of the holes wasn't drilled out enough. It looked perfect, but wasnt drilled out quite enough. So I contacted the seller and informed them of the issue. He was really grateful for the information and also grateful that I was going to fix it myself with a step bit to bore out the hole the c.0.5mm it needed to be perfect. He explained that as the lone fabricator it slipped through but he will check the batch to ensure no other issues.
Once I had this (very minor) issue solved I fully assembled and set up the target...
And it is PERFECT. It's very sturdy, holds 2 A4 targets perfectly, can adjust to hold others and is great for when I have 2 practise BR targets... With around 80-100 mini targets per A4 sheet you can have a full afternoon of shooting set up all at once.
Though I had a very minor issue, for the money I would say this is probably the best A4 holder that I've found. I would highly recommend these to the AGF community if you're struggling to find a holder for your BR20 targets.
Wasn't sure where to post this but I have recently come across something that is going to help massively on the AGF BR20. I want to preface this with I am not affiliated nor have I been asked to do this. It will be a completely honest review.
I have struggled for ages to find an A4 card holding target that is:
- Functional
- Hard-wearing
- Relatively inexpensive
- Available
At my local range, they have some A4 targets that you can borrow but they are rarely available this time of year with the number of Taster Sessions and Duke of Edinburgh Award shooters they get used for.
I've been searching all over the forums and various retailers trying to find something that doesn't cater to only 14cm or 17cm, and doesn't cost the earth until I stumbled across Gr8Fun Targets. I ordered one of their double A4 target holders and it recently came well packaged and very quickly.
First impressions were that the retail packaging it came in was a bit pants and it didn't come with any tools for assembly. But seeing as the outer packaging was sturdy and safe and the tools needed are very simple and should really be lying around everyone's home somewhere, I endeavoured.
The metalwork is of a good standard and the parts went together without a hitch. Except... one of the holes wasn't drilled out enough. It looked perfect, but wasnt drilled out quite enough. So I contacted the seller and informed them of the issue. He was really grateful for the information and also grateful that I was going to fix it myself with a step bit to bore out the hole the c.0.5mm it needed to be perfect. He explained that as the lone fabricator it slipped through but he will check the batch to ensure no other issues.
Once I had this (very minor) issue solved I fully assembled and set up the target...
And it is PERFECT. It's very sturdy, holds 2 A4 targets perfectly, can adjust to hold others and is great for when I have 2 practise BR targets... With around 80-100 mini targets per A4 sheet you can have a full afternoon of shooting set up all at once.
Though I had a very minor issue, for the money I would say this is probably the best A4 holder that I've found. I would highly recommend these to the AGF community if you're struggling to find a holder for your BR20 targets.
Airgun Targets by Gr8fun, Quality airgun targets and air rifle targets
Airgun Targets by Gr8fun : - Spinning Airgun Targets Self Adhesive Airgun Targets Cordless Resetting Airgun Target Blank Holding Airgun Targets Range Sticks and Zeroing Targets IPAS Targets Corded Airgun Targets Rimfire Targets Airsoft Targets Air Pistol Targets Spares Novelty Airgun Targets...
www.gr8fun.net
