FFP3 mask recommendations

[po79]

Looking for a reusable ffp3 mask.
Got a house to renovate and there's going to be lots of dust some of which could be nasty so I'm looking for a decent mask that I can replace the filters on.
I'm not a tradesman so do want to spend a fortune as if I'll be using it for years to come just a decent mask at a decent price.
Thanks

 

[Dudd I]

As in a mask with replaceable filters. I use either:

https://www.screwfix.com/p/trend-stealth-medium-large-half-mask-p3r/346fh

Or

https://www.screwfix.com/p/delta-plus-spider-mask-reusable-dust-mask-with-5-filters-p3/3865v

Depends what I'm doing n how long for.
Otherwise, have a look at Screwfix offerings n take your pick.
However, it is recommended to try a mask out for fit.

 

[One on top of two]

I use these quite a bit with work …..

https://www.amazon.co.uk/gp/aw/d/B00ZCOFHM0/?_encoding=UTF8&pd_rd_plhdr=t&aaxitk=4a7568ba4c8b1a6c96f903565448cf44&hsa_cr_id=7625480290102&qid=1736439795&sr=1-1-e0fa1fdd-d857-4087-adda-5bd576b25

Really good , also check for your face fit your self , easy to get hold of cartridges , overall really easy mask to maintain and live with

 

[po79]

Cool thanks for that, I'll check them out.
I've not done a face fit before but I want to make sure I get the most protection as possible.

 

[Hundred]

JSP Force8 Mask With P3 PressToCheck Filters

Offers superior low breathing resistance. Accepts low profile Force8™ filters. Filters provided protects against solids and liquid aerosols and dust. Conforms to EN140 (Face piece), EN14387:2004 and EN143:200 (Filter performance).Force8 half mask with 'PressToCheck' filters from JSP. The Force8...

www.toolstation.com

Can't go wrong with one of these, replacement filters are also readily available for a good price should you need them

 

[Hundred]

What I will say is make sure you get the right size whichever you go for as you may struggle to get a comfortable seal if not

 

[One on top of two]

JSP Force8 Mask With P3 PressToCheck Filters

Offers superior low breathing resistance. Accepts low profile Force8™ filters. Filters provided protects against solids and liquid aerosols and dust. Conforms to EN140 (Face piece), EN14387:2004 and EN143:200 (Filter performance).Force8 half mask with 'PressToCheck' filters from JSP. The Force8...

www.toolstation.com

Can't go wrong with one of these, replacement filters are also readily available for a good price should you need them

Yep thats the one i use , my picture never worked , but 100% agree with you there very good .

 

[po79]

Thanks guys.
I did have a JSP mask years ago (maybe 10 years) and the issue I had with it was finding replacement filters.
It was just a supply or local issue.

 

[Twoplusfour1]

JSP Force8 Mask With P3 PressToCheck Filters

Offers superior low breathing resistance. Accepts low profile Force8™ filters. Filters provided protects against solids and liquid aerosols and dust. Conforms to EN140 (Face piece), EN14387:2004 and EN143:200 (Filter performance).Force8 half mask with 'PressToCheck' filters from JSP. The Force8...

www.toolstation.com

Can't go wrong with one of these, replacement filters are also readily available for a good price should you need them

Another vote for the jsp.

 

[po79]

You don't get more concrete than that!
I'll see if I can take a look at some over the weekend.
Won't be getting much done today as I've been up all night with our Springer who just had 9 pups.

 

[Neptune]

Bearded folks often have difficulty getting a good seal, a little bit of Vaseline on the edge helps.

 

[po79]

A little bit of what on the what!!?? Ooh-er

I've often found that problem myself (being a bearded person and all).

I'll probably just shave it off if a seal can't be achieved.

Cheers