Does anyone make replacement HW recoil pads?

Papoose

Super member
Joined
Oct 16, 2022
Messages
558
Reaction score
1,393
Location
Oxfordshire
I always find the Weihrauch plastic pads slippery in the shoulder. A good quality rubber one would make a nice edition.
 
I always find the Weihrauch plastic pads slippery in the shoulder. A good quality rubber one would make a nice edition.
Anything aftermarket ( of which there are a truckload), will be " grind to fit", to customize to your particular stock. G.T.F. is a great excuse to re - finish the stock, as you can fit pad to a very precise blending, when pad is mounted to stock. Without re - finishing, a special jig & bench linisher is required( best) to get comb/ toe angles correct.
 
Have a look at J S Ramsbottom but be aware a lot are out of stock and if they do have one you like they will need grinding to fit as they wont be a direct fit unless you land lucky. You may find one similar to a Weihrauch one.


Chambers is another.

 
Last edited:
Have a look at J S Ramsbottom but be aware a lot are out of stock and if they do have one you like they will need grinding to fit as they wont be a direct fit unless you land lucky. You may find one similar to a Weihrauch one.


Chambers is another.

Cheers Bighit, Nath refinished my stock not long ago and I'll probably do more harm than good. I may try another HW pad first because 40 years of use has given it a sheen.
 
I have all my 97's with the standard hw adjustable recoil pad i think they are one of the best. As far as im aware same part number as hw100 but like above you'll have to shape it. I have a new spare one I think it was about £80 so not cheap
 
Back
Top