bsa scorpion T10

[Steviebee]

HI,
Can the scorpion T10 be converted to load from the right hand side? with the single shot adaptor?
cheers

 

[rkr]

HI,
Can the scorpion T10 be converted to load from the right hand side? with the single shot adaptor?
cheers

If you move the plate that covers the mag well to the left side it should work. You need to drill m3 threaded holes on the left side and probably mod the single shot loader for locking pin indent. T10 probably has the old magazine indexing system in place that needs to be removed.

 

[Steviebee]

Sorted cheers for the reply, I found a 3d printed device on "the bay of evil" that fills in the magazine well, and you pop the pellet in from the right, great little device and only £12.
Cheers

 

[rkr]

Sorted cheers for the reply, I found a 3d printed device on "the bay of evil" that fills in the magazine well, and you pop the pellet in from the right, great little device and only £12.
Cheers

It's quite easy to get the pellet in there skirt forwards with one of those devices. Had one of them and didn't like it.

 

[Steviebee]

I'm going to open up the aperture slightly to allow it to drop in easier