• the Daily hi thread just say hi :)
  • Please DO NOT discuss the use of optics/NV for HUNTING in this section. Any hunting related Optics questions should go in the hunting section.

Arken Zulus - User experiences

I don’t have Bluetooth on the menu screen or ballistic table, I have done it through internet but it’s not moving the reticle when I range it.
 
Have you done the basics..

Restart the scope. Pull battery.

Ballistic table isn't on the menu, you have to choose it in the ballistic options menu and turn on ballistic table or Ballistic calculator.

Have you looked at the manuals?

If you had you would see this in the manuals.

Did your wifi connection drop during update?

Cheers

Billy
 
GPCBILL said:
Have you done the basics..

Restart the scope. Pull battery.

Ballistic table isn't on the menu, you have to choose it in the ballistic options menu and turn on ballistic table or Ballistic calculator.

Have you looked at the manuals?

If you had you would see this in the manuals.

Did your wifi connection drop during update?

Cheers

Billy
Click to expand...
Bill I don’t have this option since the update I have done what you said about restart ibut still the same.
It’s transferring the data according to the blue plane icons but when I range my target my zero on the reticle does not move or change colour.
 

Attachments

  • IMG_2359.webp
    IMG_2359.webp
    115 KB · Views: 26
Which app are you using?

You should be using the DNT app now you are on the latest firmware.

Cheers

Billy
 
Countryman said:
Bill I don’t have this option since the update I have done what you said about restart ibut still the same.
It’s transferring the data according to the blue plane icons but when I range my target my zero on the reticle does not move or change colour.
Click to expand...
The reticle won't move until you turn on table for ballistics calculation. You also have to choose aiming method.

Hold over or dial in..


Cheers

Billy
 
Looking at screen from top left I now have Rav pip WiFi zero reticle enhanced colour mode
Recording audio loop recording gyroscope date label date and time auto power off language formatting system setting version no.
 
Okay then your firmware upload was corrupted. Try restoring factory settings in the system settings menu.
 
Countryman said:
My ballistic table is below.
Click to expand...
We are not worried about your table. It has nothing to do with what you are experiencing.




You probably moved your phone or scope during the firmware update or there was a break in connection.

Try connecting the scope via WiFi to the DNT app and then disconnect, it might offer you another firmware update.

Cheers

Billy

Cheers

Billy
 
GPCBILL said:
This is used for glass scopes, you don't need to do anything with it or you can use it to check ballistics on the scope.

Cheers

Billy
Click to expand...
Hi, you obviously understand the Zulus very well, I remember reading somewhere about tweaking the BC in the settings if the POI was off at distances beyond the zero range, is this correct and if so what adjustments are needed, ie, to move the POI up or down, increase or decrease the BC? Thanks in advance 😁
 
GPCBILL said:
We are not worried about your table. It has nothing to do with what you are experiencing.




You probably moved your phone or scope during the firmware update or there was a break in connection.

Try connecting the scope via WiFi to the DNT app and then disconnect, it might offer you another firmware update.

Cheers

Billy

Cheers

Billy
Click to expand...
No joy at all I am not getting the letter selected for my table being displayed in the corner of the screen if that’s anything to do with it.??
 
Let's carry on the conversation in D.M.

You have corrupted the firmware install and nothing you are doing is going to help that.

Cheers

Billy
 
Hollowlegs said:
Hi, you obviously understand the Zulus very well, I remember reading somewhere about tweaking the BC in the settings if the POI was off at distances beyond the zero range, is this correct and if so what adjustments are needed, ie, to move the POI up or down, increase or decrease the BC? Thanks in advance 😁
Click to expand...
@Fx shooter posted a video on setting up BC which is a good starting point.

Thread 'Fine tuning your ballistic scope' https://airgunforums.co.uk/threads/fine-tuning-your-ballistic-scope.135696/

Cheers

Billy
 
Last edited:
Apologies in advance if this seems like a simple question, but I was hoping for some help !!

I have the 3-12 mounted on my HW100 using a 35mm MOA dovetail mount.

My Zero X & Y settings are X=-35 Y=70

The LRF splash is way low & I can only see it at base mag (or close to it) meaning I have to zoom out to range find and use the balistic feature.

I'm guessing that 35mm is too much of an angle and I need a mount that points more naturally at the POA to raise the LRF to be more central in relation to my zero ?

Is there anyway to change the splash within the settings, or is my only option to change the mounting system

Also if anyone else uses HW100 with a DNT Zulus, what mounting option have you gone for :)

Thanks
 
themuzzr said:
Apologies in advance if this seems like a simple question, but I was hoping for some help !!

I have the 3-12 mounted on my HW100 using a 35mm MOA dovetail mount.

My Zero X & Y settings are X=-35 Y=70

The LRF splash is way low & I can only see it at base mag (or close to it) meaning I have to zoom out to range find and use the balistic feature.

I'm guessing that 35mm is too much of an angle and I need a mount that points more naturally at the POA to raise the LRF to be more central in relation to my zero ?

Is there anyway to change the splash within the settings, or is my only option to change the mounting system

Also if anyone else uses HW100 with a DNT Zulus, what mounting option have you gone for :)

Thanks
Click to expand...

I use the DNT Zulus 5-20R on my HW100kt, with it came a 20MOA mount. The 'splash' is slightly to the left of cross-hairs on 5x zoom so maybe the 20moa mount could be just the job for you. As far as I know, you can't change the position of the 'splash' in the settings, although I could be wrong. I haven't noticed it in them.
 
HI, thanks for the reply !

There is a post (way back at the start of this thread) where someone has said that he had been in talks with DNT about moving this, and that there was a way to remove the LRF cover and adjust some screws ...... but he never (that I can find) post an update !!! He's a banned member now 😫
 
You must log in or register to reply here.
Back
Top