1260engineer
Member Extraordinaire
What would folks say is a good test of all 3 .
Just how would you test your self and the rifle.
Anyway this was my plan this afternoon.
(As Ive been shooting my springer for the last few months )
and my pcp's have been quite since December it was time to wake one up properly.
Weapon of choice today is my Titan 3 Phantom . (designed and built in a shed by me) 177 precharged pneumatic.
Range 25yds
Pellets JSB 10.34 . 4.52's . 700fps . 11.25fpe
Target .BR20 2mm bull .
Goal . inside the 9 ring which i think is about 6mm ( i might be wrong )
Target . plan 1 .
shoot all 30 targets 25 black and the 5 red . 3 rounds per target . 90 rounds . plus 2 groups of 4 rounds 98 rounds total .
First 30 targets
second 30
third 30
plus 2 four shot groups
At this point i thought as one does feck it


Up went another target . Target 2
3 rounds middle and 4 corners black targets and 3 rounds far left . middle and far right red targets
Target 3
1 shot each target . then 3 rounds on the No11
then 2 rounds No17 one r/h. one l/h ...Then 4 groups of 3 rounds between the red targets .
The pellets were straight for the tin . well chucked on a towel at the side of me . I think i had 3 or 4 iffy pellets in the whole shoot .
195 rounds ish total time 48 minutes 18 seconds with some waffle and going to get the targets



And on video
The Titan 3 Phantom. blummin ekk
Consistency

Accuracy

Shooter
7 out of 10 needs more practice. See teacher. 3 weeks detention
Ok this is a bit OTT as a test . but these things have to be done when you build your own . there's no point in building something if it can't hold its own against manufacturers rifles .
Are there any other loons who do this sort of thing to find out stuff .

Just how would you test your self and the rifle.
(As Ive been shooting my springer for the last few months )
and my pcp's have been quite since December it was time to wake one up properly.
Weapon of choice today is my Titan 3 Phantom . (designed and built in a shed by me) 177 precharged pneumatic.
Range 25yds
Pellets JSB 10.34 . 4.52's . 700fps . 11.25fpe
Target .BR20 2mm bull .
Goal . inside the 9 ring which i think is about 6mm ( i might be wrong )
Target . plan 1 .
shoot all 30 targets 25 black and the 5 red . 3 rounds per target . 90 rounds . plus 2 groups of 4 rounds 98 rounds total .
First 30 targets
second 30
third 30
plus 2 four shot groups
At this point i thought as one does feck it
Up went another target . Target 2
3 rounds middle and 4 corners black targets and 3 rounds far left . middle and far right red targets
Target 3
1 shot each target . then 3 rounds on the No11
then 2 rounds No17 one r/h. one l/h ...Then 4 groups of 3 rounds between the red targets .
The pellets were straight for the tin . well chucked on a towel at the side of me . I think i had 3 or 4 iffy pellets in the whole shoot .
195 rounds ish total time 48 minutes 18 seconds with some waffle and going to get the targets
And on video
The Titan 3 Phantom. blummin ekk
Consistency
Accuracy
Shooter
Ok this is a bit OTT as a test . but these things have to be done when you build your own . there's no point in building something if it can't hold its own against manufacturers rifles .
Are there any other loons who do this sort of thing to find out stuff .
Last edited: