3D printed adaptor!

[squealeyhealey]

I’ve got an idea for an adapter to fit a NateChrony to vintage springers. Is there anyone here who would be prepared to model & 3D print it for me? OBS I’m happy to reimburse you for time & materials. ta

 

[squealeyhealey]

This is what I would like to make.

 

[Tony Hancock]

Your drawing isn't meant to be to scale is it Squealey as the 30 dia is nothing like almost twice as large as the 14 dia.
Perhaps you have mixed up your dia's with your radius ?
I do not see any dia for the small holes on the right side ... unless you meant them to be 2mm as per the slot to the middle left ...

 

[squealeyhealey]

Your drawing isn't meant to be to scale is it Squealey as the 30 dia is nothing like almost twice as large as the 14 dia.
Perhaps you have mixed up your dia's with your radius ?
I do not see any dia for the small holes on the right side ... unless you meant them to be 2mm as per the slot to the middle left ...

Ohp’s yeah the scale is a little out & I forgot the diameter!

 

[squealeyhealey]

Updated sketch, not sure what happened with to Dia30, must have been having a bad day!!

 

[Tony Hancock]

Inner Diameter of the Outer 14mm Dia right side ?

 

[squealeyhealey]

Thanks Dia 9mm

 

[Tony Hancock]

Is your idea supposed to look like this ?

 

[Tony Hancock]

If you have GoogleDrive then just download this STL file ( link below ) then anyone with a 3D printer can use it to make your project ...

STL File (GoogleDrive Users)

 

[Tony Hancock]

Well, maybe you've lost interest so I will now leave this alone ... if & when you can get one printed it will look like this ...


whooooooooooooooooooooooosh ... I'm gone !

 

[squealeyhealey]

Well, maybe you've lost interest so I will now leave this alone ... if & when you can get one printed it will look like this ...


whooooooooooooooooooooooosh ... I'm gone !

Hiya Sorry I’ve been away thanks that’s just what I was after thanks

 

[squealeyhealey]

Well, maybe you've lost interest so I will now leave this alone ... if & when you can get one printed it will look like this ...


whooooooooooooooooooooooosh ... I'm gone !

Hiya Sorry I’ve been away thanks that’s just what I was after thanks

 

[Tony Hancock]

I'll pop item in the post tomorrow and all I ask in exchange is the postal cost of £1.55 as it was a quick 10 min drawing and only a 12 min print costing pennies ...
Info will be provided in the parcel.

 

[Tony Hancock]

Posted ... should arrive Friday I believe ...

 

[squealeyhealey]

Thanks Tony