Reximex Myth query

[BloBack]

My mate just bought a Myth and whist testing it I noticed a small , what looks like a snap off grub screw just foreward of the trigger , on the right hand side . Anyone know what it,s for ? There,s also three of these snap off grubscrews provided with the rifle . I just wondered what they,re for . The rifle came filled to almost 250 bar and , at that pressure is putting out 10-10.2 fpe. Am I right in assuming the sweet spot should come in at aroung 190 Bar ? And , I have to say , it,s very accurate . Perfect for ratting , which is what it will be used for .

 

[Fatbob 59]

If you mean just in front of the trigger in the bottom of the block with the stock removed then it's probably the anti tamper screw for the valve , should be another normal grub screw nearby ?

 

[BloBack]

I haven,t removed the stock - no need to . It,s a small screw , foreward of the trigger on the right side . It looks to be far too low in the action to have anything to do with the valve . I,m not touching it , i,m just curious as to what it,s for .

 

[Fatbob 59]

Whereabouts ?

 

[BloBack]

Nowhere on that pic . My mate,s is a synthetic model . I,m starting to think it could be a bleed screw .

 

[OldPlinkster]

Airgun Spares - Reximex - Myth - T. W. Chambers & Co

twchambers.co.uk

I guess you mean that one. Nobody know, not on parts diagram?

Just bleed empty and take all apart, thats what I have been doing since four years old with all my toys Just to see how it actually works... just joking of course

 

[Jay.T]

is it this one

doesn't seem to do anything

 

[Yellowvanman]

I bought a Myth yesterday and I was wondering what they are for too.
The parts diagram in the manual says its a ball point set screw, which I suppose it is.
Ive still no idea what it does

 

[OldPlinkster]

I bought a Myth yesterday and I was wondering what they are for too.
The parts diagram in the manual says its a ball point set screw, which I suppose it is.
Ive still no idea what it does

Ok if its ball point, then it is most likey for bleeding? No manual with the gun??

 

[Jay.T]

On the synthectic stock it protrudes into the spare mag holder void but does'nt seem to achieve anything
screw in or out the spare mag still holds in place

 

[Richcj]

Is it providing a detent for that small hole in the magazine? To lock it more in place?

 

[BloBack]

Both those theories make sense . But, as it,s not my rifle , i,m leaving well alone . Thanks anyway .