-
the Daily hi thread
Reximex Mito Thoughts?
- Thread starter Phoenixflier
- Start date
Understood. I only asked as you mentioned that you were underwhelmed by the power until I’d put about a 100 pellets through it?
DLockett
Keen member
I’ve just bought a mito to start 10m target shooting with, I’ve upgraded the sights and added a single shot magazine, tried a few shots in the garden but really need to get it dialed in on Monday night at my local club. Overall happy with it now, just need to change the trigger springs I think
Attachments
DonnyJonny
Active member
Ive just bought the same single shot magazine
I’ll give it a try this weekend. Great pistol, I took it to a local range in the week and only picked up my HW100 for a couple of minutes! Having much more fun with the Mito
DLockett
Keen member
I found the cocking lever was a little tight when loading with the single shot mag but it’s hit and miss, sometimes it’s ok, I imagine the alignment is ever so slightly off. Still huge improvement over the standard single shot tray/mag
nikvanorton
Member Extraordinaire
The matt black finish shows every mark, fingerprint and oil stain. Not the gun’s best feature.
Agreed, and I think the factory sprayed finish is a little thin.
Does anyone have the silver version? Is it nickel plated, and what is rhe uniformity of the finish like?
DonnyJonny
Active member
Not tried it yet as been busy fixing a water leak
I agree with other comments on the finish, not the best coating but I’m trying to overlook that as the gun has been very accuratesglawrie
Member
I did the spring change a couple of weeks ago. And it does make quite the difference.
One thing though. The first image is what I uncovered when I removed the trigger guard and the second is an image I lifted off of the net (can’t remember where - good chance it was on this forum to guide me).
Check that original spring position out
One thing though. The first image is what I uncovered when I removed the trigger guard and the second is an image I lifted off of the net (can’t remember where - good chance it was on this forum to guide me).
Check that original spring position out
Attachments
DonnyJonny
Active member
Can I ask where the replacement springs are purchased from please? Does it make the trigger a lot lighter? ThanksI did the spring change a couple of weeks ago. And it does make quite the difference.
One thing though. The first image is what I uncovered when I removed the trigger guard and the second is an image I lifted off of the net (can’t remember where - good chance it was on this forum to guide me).
Check that original spring position out
sglawrie
Member
I’m not too sure if I am allowed to directly link to the seller on eBay (I am not the seller). But if you search Compression Spring Small Various Sizes Up To 10mm Diameter Pressure Compressed and choose a 4mmx15mm 4mmx8mm both 0.4mm you will be good.
YouTube also has at least 2 tutorials how to do it.
And yes it does make it lighter.
YouTube also has at least 2 tutorials how to do it.
And yes it does make it lighter.
DonnyJonny
Active member
Brilliant. Thanks
Squint1958
Busy member
The only problem I had was with the original mags. They can be a pain to load into the pistol.
sglawrie
Member
I’ve never used the mags so can’t comment on them. I’ve only ever used BobPs single pellet loader (it and his sights came before I picked the pistol up).
DonnyJonny
Active member
Yes, they’re not the best! A bit fiddly to get in and are not the strongest looking magazines. Compared to my HW100 magazines the Mito’s look like they belong in a toy. They’re ok once in place
wiltshirejohn
Member Extraordinaire
Compared to HW100 mags anything is
p.s. I've got both HW and Mito ( and a few others!!)
Last edited:
DLockett
Keen member
I’ve been looking for springs too. I’ll take a look at these thanks
P1000
Super member
Great choice for a gun.
Gragson
Proactive member
Felt left out a bit on the walnut grip, so ordered.
The fit is ok but not a surgical match, natural material at the end of the day, but think I will open up the holes a teeny bit in the wood to align better. I've got a Pretensis and noted how dry the walnut is, same with the Mito grip, so will give it a good going over with Ballistol.
I've got medium to big hands and the walnut grip is much nicer to handle for me.
The fit is ok but not a surgical match, natural material at the end of the day, but think I will open up the holes a teeny bit in the wood to align better. I've got a Pretensis and noted how dry the walnut is, same with the Mito grip, so will give it a good going over with Ballistol.
I've got medium to big hands and the walnut grip is much nicer to handle for me.
P1000
Super member
Going back to this thread , i love mine truly awesome.