panthera 600mm barrel length

[Hmangphilly]

yes sounds silly but could you give me dimensions

from the magazine face of the brass inlet to the very end of the 1/2" thread please .

just the barrel . not the shroud

thanks

 

[Hmangphilly]

Or king
or dymamic

the full length of the of the actual barrel .

so i can measure up for a solid replacement

ta

 

[Blueroll]

Or king
or dymamic

the full length of the of the actual barrel .

so i can measure up for a solid replacement

ta

So you just need me to measure from the face of the magazine well to the muzzle end of the 1/2" UNF jam nut where it holds the liner in place ?

 

[Hmangphilly]

So you just need me to measure from the face of the magazine well to the muzzle end of the 1/2" UNF jam nut where it holds the liner in place ?

Exactly

 

[Blueroll]

Exactly

Morning Phil.
On my .25 King that measures 613mm, that is with the shroud removed. With the shroud in place it adds another 36mm to the overall length of the barrel assembly.