Kral np02-pup

Baboon

Baboon

Proactive member
Joined
Jul 6, 2022
Messages
174
Reaction score
407
Location
Alnwick
Had a hankering for a light pcp and something to tinker on with and had a idea to mess around with my new to me np02 I know shot count isn’t there anymore but for something that looks cool and hopefully get 40 shots can’t complain 😅 probably not to everyone’s taste but I can’t be happier just waiting on a stock bolt to come then it’ll be tinkering inside time once I get my lathe set back up again hopefully in a few months
IMG_3556.jpeg
 
Baboon said:
Had a hankering for a light pcp and something to tinker on with and had a idea to mess around with my new to me np02 I know shot count isn’t there anymore but for something that looks cool and hopefully get 40 shots can’t complain 😅 probably not to everyone’s taste but I can’t be happier just waiting on a stock bolt to come then it’ll be tinkering inside time once I get my lathe set back up again hopefully in a few months View attachment 832268
Click to expand...
That is really smart 😁👍
 
Baboon said:
Had a hankering for a light pcp and something to tinker on with and had a idea to mess around with my new to me np02 I know shot count isn’t there anymore but for something that looks cool and hopefully get 40 shots can’t complain 😅 probably not to everyone’s taste but I can’t be happier just waiting on a stock bolt to come then it’ll be tinkering inside time once I get my lathe set back up again hopefully in a few months View attachment 832268
Click to expand...
Very nice where did you get the stock from, Thanks Mjd.
 
Mjd said:
Very nice where did you get the stock from, Thanks Mjd.
Click to expand...
There’s a few places that have them as spares for £80 it’s the scope rail that’s hard to find as that’s what attaches the stock to the chassis bagnal and kirkwood have 3 I think
 
Last edited:
  • Like
Reactions: Mjd
I’ve just bought a second hand Np-02… didn’t have plans to change anything, but now i’ve seen this, i’ve a hankering for a pup… lovely job mate!
 
Well nice balanced thing if you can find a rail it’s pretty simple swap, think it cost £90 total might be able to get the scope rail from big Dan as it’s the same as the Kral monarch just waiting on the bits to make a offset shroud now to complete the look, but a np03 or puncher k is a better chassis for this swap imo
 
Just a lil update had a quick shoot in the garden it uses about 40bar for 12 shots so hopefully 30-35 useable shots will know more when I get a new chrono as mine has stopped reading shots, but fitted a carbon barrel shroud and a armstar mag from nm products I’m staring to near the end just need to get a longer dust cover made to cover where the barrel band Used to be 😁
IMG_3577.jpeg
 
It’s just a tad bit to long but might get a barrel at some point or make a new mod to fit I think it’s the np03 cylinder it’s a 180cc one from flea bay but it’s got some scratches down the inside so not sure if it’s safe to use
 

Attachments

  • image.jpg
    image.jpg
    1.6 MB · Views: 23
Baboon said:
It’s just a tad bit to long but might get a barrel at some point or make a new mod to fit I think it’s the np03 cylinder it’s a 180cc one from flea bay but it’s got some scratches down the inside so not sure if it’s safe to use
Click to expand...

You could remove silencer and make a longer shroud or slim silencer if shotcount is needed
 
slimmer sounds the way to go but it’ll have to wait till my lathes up and running then I can do some things to quiet the action at the same time when it’s all apart, probably something I’ll change in the future for more shots but it’s easy to fill with it’s 110cc cylinder also makes me shoot my 99s aswell so can’t complain 😅
 
Came across a Webley block on bagnall n kirkwood so orders a few more things to increase shot count a bit and to play with while it’s cold out and nothing too hard to mess with before I move so it’s turning into a Webley mastiff so I can have a useful shroud and a few more shots 😁
 
Baboon said:
Came across a Webley block on bagnall n kirkwood so orders a few more things to increase shot count a bit and to play with while it’s cold out and nothing too hard to mess with before I move so it’s turning into a Webley mastiff so I can have a useful shroud and a few more shots 😁
Click to expand...
IMG_3621.jpeg
 
Baboon said:
Had a hankering for a light pcp and something to tinker on with and had a idea to mess around with my new to me np02 I know shot count isn’t there anymore but for something that looks cool and hopefully get 40 shots can’t complain 😅 probably not to everyone’s taste but I can’t be happier just waiting on a stock bolt to come then it’ll be tinkering inside time once I get my lathe set back up again hopefully in a few months View attachment 832268
Click to expand...
That looks pretty good tbf, nice and short too,
What made you go this route instead of buying krals dedicated bullpup rifle?
 
You must log in or register to reply here.
Back
Top