Hw100 stock on a HW100k

Lennox said:
What’s the difference in the The stocks between the Hw100 and HW100k. Do the fit on one another
Click to expand...
The I stock is shorter. I know you could definitely use the k stock on a standard length hw100. It would just been the barrel band was further back.
 
The only thing to worry about is the barrel band supporting the standard cylinder as the cylinder has a wider collar where the band should go for both stocks

If you’re using an Apex/Ratworks cylinder the outer diameter is the same as the standard cylinder collar all the way down so the barrel band can go wherever

You’re also going to have the potential issue of the full length stock obscuring the charging port on the cylinder

Long story short, short on long yes, long on short probably not
 
Full length stock would interfere with the fill port on a K action.

If using a K stock on a full length action, you can (IIRC) switch the fill port and valve around to opposite ends, which then aligns the wider band on the cylinder with the correct position for the barrel band in a K stock (closer to the action).

In practice seems a lot of effort when as said above, there are many aftermarket cylinders available which don’t introduce this problem.
 
Having a quick Google there’s someone that says they’ve done it on the ‘other’ place. They said the fill size barrel band position matched the collar section on the K cylinder just behind the gauge, and they had to drill the forend a little bit for the filler

I still wouldn’t put a long stock on a short gun though
 
Thanks for the response I’m looking for a new stock for my standard length hw100 il keep waiting for the right one to pop up
 
Lennox said:
A sporter stock or a newer thumb hole with the adjustable cheek riser I have a walnut thumb hole on at the moment but not a big fan of the older stock
Click to expand...
Warren Edwards puts adjustable cheek pieces onto them mate, Chris has just had his done.
 
Lennox said:
https://spares.bagnallandkirkwood.c...-hw100-replacement-laminate-adjustable-stock/ The new laminate stock is that bad of a price
Click to expand...
I personally wouldn’t be buying one of those new as much as I like the laminate stock, I also prefer the shape of yours over that one, Warren can put you a cheek piece into your gun for around £85 or so. It’s on a ball head type fitting too so you can angle it to wherever you want, looks really good too. He’s only at Rotherham.
 
Drake267 said:
I personally wouldn’t be buying one of those new as much as I like the laminate stock, I also prefer the shape of yours over that one, Warren can put you a cheek piece into your gun for around £85 or so. It’s on a ball head type fitting too so you can angle it to wherever you want, looks really good too. He’s only at Rotherham.
Click to expand...
The hole issue for me is a dont like the look of this version of the thumb hole stock it shoots good could use the riser I prefer the newer style I’m happy to wait for the right one to come up and I could add the riser to the if needed to the new one
 
Lennox said:
The hole issue for me is a dont like the look of this version of the thumb hole stock it shoots good could use the riser I prefer the newer style I’m happy to wait for the right one to come up and I could add the riser to the if needed to the new one
Click to expand...
You’ve got no taste at all! 😂
 
You must log in or register to reply here.
Back
Top