3D Printed Base Required

[ristac]

Good morning

Who has a 3D printer that they can make a small base for me please, obviously I am willing to pay. I'm looking for a block for a bag jack to sit in. Below is the jack, the base measures 120mm x 80mm so that would need to be the cut out. The second image is a rear bag holder that the Sub12 guys make on ebay, I am after something like that if doable

 

[Chandelierman]

how tall is it?

 

[ristac]

My second image is one on top of the other, the smaller is 25mm the larger 50mm sitting in the top is a sheet of sandpaper type lining as the moulded design of these is intended for holding a protek rear bag holder

 

[Chandelierman]

so you want a 25mm and a 50mm 2 to locate into each other?

 

[Big Bob]

I can print it if you have the file? or do you need it designing?

 

[ristac]

so you want a 25mm and a 50mm 2 to locate into each other?

I’d be happy with a 50mm and 25mm as I don’t feel I’d ever need an extra 75mm height so if they don’t lock together it’s not an issue

I can print it if you have the file? or do you need it designing?

I’d need it designed too

 

[Chandelierman]

I’d be happy with a 50mm and 25mm as I don’t feel I’d ever need an extra 75mm height so if the don’t lock together it’s not an issue

No drama just to put a step on it so it locates together

The big one has a 120 x 80 negative top and bottom and the smaller one has a 120 x 80 locating step but is shave 1/2mm off so it fits nice

 

[Chandelierman]

I’d be happy with a 50mm and 25mm as I don’t feel I’d ever need an extra 75mm height so if the don’t lock together it’s not an issue

I have scaled them to 128 x 88 so you have a 4mm wall

 

[ristac]

I have scaled them to 128 x 88 so you have a 4mm wall

That would be great thank you, can you let me know how much and thanks again for responding so quickly. The size 120x80 is the exact size so would it be best to have an extra 1mm cut out so I’m not forcing it in or is the the 1/2mm you’ve allowed for/mentioned

 

[OldPlinkster]

hi, couldn't keep myself of drafting a quick version of a 25-50-75mm base box.
Uploaded resulting files to Printables.com
It is for free to try, with a small discaimer, I haven't yet printed it myself

Airgun shooting base for small jack by Enderman Prints | Download free STL model | Printables.com

 

[ristac]

hi, couldn't keep myself of drafting a quick version of a 25-50-75mm base box.
Uploaded resulting files to Printables.com
It is for free to try, with a small discaimer, I haven't yet printed it myself

Airgun shooting base for small jack by Enderman Prints | Download free STL model | Printables.com

Chandlierman has kindly put one together for me and it went out in the post today but I appreciate the link to the file thank you