paulhardwick
Active member
Cannot put a pic up of it, Titan Mohawk in .177, its like going to the gym cocking it, it is certainly unusual!!
-
the Daily hi thread
**THE LATEST PURCHASE THREAD**
- Thread starter Joey
- Start date
tjc_dev
Well-known member
Silverhalide
Super member
New paring knife, limited releases throughout the year and I couldn’t not have it.
Groot
Super member
The Mk6 Reflex mod I bought off @Swinton Stalker looks the part on my Redwolf. I much prefer the look over the XLK I previously had on it.
R ian
Busy member
Comfy range seat cushion.
tjc_dev
Well-known member
That really blends in with the barrel, I have the short 0dB moderator and would prefer one like that in the future - got to sort out rests first.
Groot
Super member
It’s almost a perfect match, where the carbon shroud is textured and Matt the mod is smooth with a slight shine. At a distance it’s hard to see the slight differences.
Reximex Lyra .22, some cheaper 'will-do' scope (Keck Vanguard 4-16x50 AO IR from AirgunsEurope/Dick's Dumpstore NL), SAK2i moderator from Oulun Työstökeskus and a Negrini case modelled for bolt-action rifles.
This is in fact my first PCP, and previously I've owned some .177 springers which I have left to my family overseas before moving to Europe.
I've had no problem with this Lyra at all, except for some pellet shapes really breaking the laminar flow at the higher velocities, but they behave well when the power is adjusted a bit before the middle mark.
Also bought a DicoveryOpt ED-LHT gen2 3-15x50 scope which is almost 90mm wide and can't fit in this case. I use an electric bass guitar gig bag on occasion, but been wondering about purchasing another PCP or a springer in the future, and have each settled in one case - and with that said, I would like to ask for some recommendations of a rifle that could fit these Negrini cases, which I'm quite fond of, but understand this condition be quite tricky to satisfy. The Reximex Lyra just barely matches it, and the Pretensis/Daystar might not because of the stock volume following the trigger guard. FX DRS... maybe those with the short plenum block.
This is in fact my first PCP, and previously I've owned some .177 springers which I have left to my family overseas before moving to Europe.
I've had no problem with this Lyra at all, except for some pellet shapes really breaking the laminar flow at the higher velocities, but they behave well when the power is adjusted a bit before the middle mark.
Also bought a DicoveryOpt ED-LHT gen2 3-15x50 scope which is almost 90mm wide and can't fit in this case. I use an electric bass guitar gig bag on occasion, but been wondering about purchasing another PCP or a springer in the future, and have each settled in one case - and with that said, I would like to ask for some recommendations of a rifle that could fit these Negrini cases, which I'm quite fond of, but understand this condition be quite tricky to satisfy. The Reximex Lyra just barely matches it, and the Pretensis/Daystar might not because of the stock volume following the trigger guard. FX DRS... maybe those with the short plenum block.
Nick_M
Well-known member
jcr
Member
an adjustable cheek riser from Bob Pattendens ebay store.
Gav will fix it
New member
Just bought a Reximex Pretensis from BAG. Going back on payday for a Reximex Zone i think lol.