Telbert
Super member
- Joined
- Jul 7, 2022
- Messages
- 1,130
- Reaction score
- 1,846
Give yourself a break from the stress mate. Take it to someone that knows what they're doing.
-
the Daily hi thread
Help fixing my BSA Super 10
- Thread starter hawnet
- Start date
i have sent my old BSA's off to https://dbgunstocksuk.com/ and they were brilliant. Doz is the guy you want to speak to as he has been really helpful with my old airsporters
Richie#
Super member
The stock screw has become stuck in the lug that holds the mainspring and guide in and has just unscrewed it allowing spring and guide to make a bid for freedom
This part should be still in the action holding the spring and guide in
Super-20
Super member
The parts you've lost are the hammer spring and its slip washer .
And the detent bearing and its spring they are a bit of a pain to resemble leading me to believe the small spring and bearing you cant find were not reassembled the last time someone was inside it.
Even when the stock screw is removed the black nylon spring guide remains with the rifle and is held quite firmly in tension with the bearing and its spring . It goes back in with quite a snap / click when reassembled correctly.
Dont stress , take a moment away from the thing then watch the strip down video on YouTube.
You'll get most of those parts from j knibbs or chambers or even the bay of evil.
And the detent bearing and its spring they are a bit of a pain to resemble leading me to believe the small spring and bearing you cant find were not reassembled the last time someone was inside it.
Even when the stock screw is removed the black nylon spring guide remains with the rifle and is held quite firmly in tension with the bearing and its spring . It goes back in with quite a snap / click when reassembled correctly.
Dont stress , take a moment away from the thing then watch the strip down video on YouTube.
You'll get most of those parts from j knibbs or chambers or even the bay of evil.
Last edited:
Super-20
Super member
Thankyou for your replies. Yes the luttle spring and ball bearing are gone..its the triggee screw holding it in...i managed to get it all togethor and filled the buddy bottle then screwed it into the regulator valve and the air came gushing out again...i am wondering if its catching on the stock inside where I cannot see. I will try again in a few days. Thanks again.The parts you've lost are the hammer spring and its slip washer .
And the detent bearing and its spring they are a bit of a pain to resemble leading me to believe the small spring and bearing you cant find were not reassembled the last time someone was inside it.
Even when the stock screw is removed the black nylon spring guide remains with the rifle and is held quite firmly in tension with the bearing and its spring . It goes back in with quite a snap / click when reassembled correctly.
Dont stress , take a moment away from the thing then watch the strip down video on YouTube.
You'll get most of those parts from j knibbs or chambers or even the bay of evil.
I have made contact and taking the gun to them. Thanks for the link.
let us know how you get on