Snowpeak ap900 looks nice for the money

Butt hooks and pads aren't really my thing and I'm over run with other projects at the moment, Im sure the likes of JB3D will have a selection of addons soon enough.
Sorry I cant help.
Bob
no problem, thanks
 
I've got one for sale on Gun trader it was an impulse buy but I cant get on with .177 I've tried loading the mags with pellets but I've got dodgy fingers. I haven't put a pellet through it yet and have had it for a while but its up for sale now and I'm just trying to get back what it cost me.
 
So it's claimed to be brand new and never fired a shot.

So I magnified the pics posted in the ad...

View attachment 902505

:unsure:

.
That pic is from my advert and I can assure anyone that this gun has not been tinkered with they are NOT witness marks that is a lighting issue I can poat pics or video if anyone is intertested
 
Here you go
 

Attachments

  • ap900.webp
    ap900.webp
    281.8 KB · Views: 62
  • ap9001.webp
    ap9001.webp
    254.2 KB · Views: 66
I can assure anyone interested in the gun that if you collected the gun and found it not as advertised I would pay you fuel for wasting your time this pic posted previously puts the image in a bad light
 
I can assure anyone interested in the gun that if you collected the gun and found it not as advertised I would pay you fuel for wasting your time this pic posted previously puts the image in a bad light
If you got access to the sales section put it on there mate.i doubt it would hang about for long .good luck with your sale 👍
 
That pic is from my advert and I can assure anyone that this gun has not been tinkered with they are NOT witness marks that is a lighting issue I can poat pics or video if anyone is intertested

Ok
Here you go

That's better and just goes to show difficulty of judging by pics many would have passed advert by. You might want to post the better pic on advert.

And also thoroughly check what your posting on an internet gun site as there can be misunderstandings especially outside of AGF where people posting are generally known entities.

Always best to use AGF in my mind.
 
Has anyone got more of an idea when these are likely to be back in stock. I've seen sometime in March mentioned a couple of times. Just wondered if there was anyone in the know that might be able to give us a hint?
 
Question for the more knowledgeable (not difficult compared to me...)



I was adjusting my reg yesterday and went to low, so needed to wind it back out a little. I opened the air bleed screw, but no air came out. I had to unscrew the guage on the end of the tube to release the air. Why would that be?



Thanks, Nick.
 
So it's claimed to be brand new and never fired a shot.

So I magnified the pics posted in the ad...

View attachment 902505

:unsure:

.
To be honest, the amount of buyers that will have taken their guns apart, because they think they know what they are doing and then stuck it all back together again and offered them for sale, must be a minefield, depending on who has done what. Fair enough, buying S?H off a dealer should give some type of warranty/peace of mind, but buying privately from someone you don't know and have no idea what 'improvements' they have attempted can quickly become costly. S/H goods are just that and the price should always reflect this.
 
Has anyone got more of an idea when these are likely to be back in stock. I've seen sometime in March mentioned a couple of times. Just wondered if there was anyone in the know that might be able to give us a hint?
When I ordered mine Range and Country told me the next delivery was going to be in March. That was when I ordered about three weeks ago.
 
I can assure anyone interested in the gun that if you collected the gun and found it not as advertised I would pay you fuel for wasting your time this pic posted previously puts the image in a bad light

Well i took the gamble :rolleyes:and purchased the AP900 in .177 from @GaryM on gun trader (I had already seen the advert before it was mentioned on here) , I only use .177 but recently purchased a second hand .22 to see what all the fuss is about.
Just hope i can get the .177 shooting as well as the .22 as its single hole at 25mtrs (bloody weather stopped me testing further on one of my perms).

Have lightened hammer (thanks to @jeffsky YouTube video), changed spring and all the other usual stuff and its performing well.

Reg set at approx 85bar and i am sure that could be lowered with more testing but at the moment i am happy with the results, Below 40 Shots took it from 230bar down to 150ish with H&N FTT 14.66gr using a @BobP single shot loader that came with the .22.

.22 will be sold on once i have the .177 shooting as i would like it.


Regards
Nic (itching to my hands on the .177)

AP900_22_2.webp
AP900_22_1.webp




Shot count: 40
Low: 594
Hi: 596
Avg: 595
STD Dev: 1
Spread: 2

2/14/26 3:50:10 PM,596,FPS,11.6,FT Lbs,
2/14/26 3:50:29 PM,596,FPS,11.6,FT Lbs,
2/14/26 3:50:44 PM,596,FPS,11.6,FT Lbs,
2/14/26 3:51:00 PM,594,FPS,11.5,FT Lbs,
2/14/26 3:51:13 PM,594,FPS,11.5,FT Lbs,
2/14/26 3:51:34 PM,594,FPS,11.5,FT Lbs,
2/14/26 3:52:15 PM,596,FPS,11.6,FT Lbs,
2/14/26 3:52:30 PM,594,FPS,11.5,FT Lbs,
2/14/26 3:52:45 PM,596,FPS,11.6,FT Lbs,
2/14/26 3:53:01 PM,594,FPS,11.5,FT Lbs,
2/14/26 3:53:21 PM,596,FPS,11.6,FT Lbs,
2/14/26 3:53:38 PM,594,FPS,11.5,FT Lbs,
2/14/26 3:53:53 PM,594,FPS,11.5,FT Lbs,
2/14/26 3:54:08 PM,596,FPS,11.6,FT Lbs,
2/14/26 3:54:55 PM,596,FPS,11.6,FT Lbs,
2/14/26 3:55:10 PM,596,FPS,11.6,FT Lbs,
2/14/26 3:55:24 PM,596,FPS,11.6,FT Lbs,
2/14/26 3:55:41 PM,594,FPS,11.5,FT Lbs,
2/14/26 3:55:57 PM,594,FPS,11.5,FT Lbs,
2/14/26 3:56:09 PM,596,FPS,11.6,FT Lbs,
2/14/26 3:57:21 PM,596,FPS,11.6,FT Lbs,
2/14/26 3:57:58 PM,596,FPS,11.6,FT Lbs,
2/14/26 3:58:25 PM,594,FPS,11.5,FT Lbs,
2/14/26 3:58:38 PM,596,FPS,11.6,FT Lbs,
2/14/26 3:58:54 PM,594,FPS,11.5,FT Lbs,
2/14/26 3:59:05 PM,596,FPS,11.6,FT Lbs,
2/14/26 3:59:18 PM,596,FPS,11.6,FT Lbs,
2/14/26 3:59:34 PM,596,FPS,11.6,FT Lbs,
2/14/26 4:00:37 PM,596,FPS,11.6,FT Lbs,
2/14/26 4:00:49 PM,594,FPS,11.5,FT Lbs,
2/14/26 4:08:20 PM,596,FPS,11.6,FT Lbs,
2/14/26 4:08:35 PM,596,FPS,11.6,FT Lbs,
2/14/26 4:09:09 PM,594,FPS,11.5,FT Lbs,
2/14/26 4:09:22 PM,594,FPS,11.5,FT Lbs,
2/14/26 4:09:45 PM,596,FPS,11.6,FT Lbs,
2/14/26 4:09:56 PM,596,FPS,11.6,FT Lbs,
2/14/26 4:10:10 PM,594,FPS,11.5,FT Lbs,
2/14/26 4:10:25 PM,596,FPS,11.6,FT Lbs,
2/14/26 4:10:38 PM,596,FPS,11.6,FT Lbs,
2/14/26 4:10:49 PM,596,FPS,11.6,FT Lbs,
 

Attachments

  • AP900_22_2.webp
    AP900_22_2.webp
    71.1 KB · Views: 19
Back
Top