GrandPA

The continuity of the rails is something watch for depending which mounts you use I thought Britannia rails for a .223, .243 and .22lr...

I haven`t had chance to check with the ZT4K yet but I have it mounted in Tier One 2 piece pic rings and I know that I can reliably...

Okay I'm asking in this thread as the scope I'm considering for this is the 4k. Do any of you have experience of hot swapping a scope...

Ask in the 3D printing section perhaps

Worth trying different materials too. I might have to try one made from PPA-CF for max ‘toughness’. The more rigid ASA printed...

All my silenced shrouds and mods use my own design 3D printed baffle system, they work very well.

Printing with a couple more walls as opposed to going over the top with infill with give a good increase in strength. Also the position...

Fusion is still free for personal use but the link is (deliberately?) hard to find. You can have up to 10 editable models on the go...

I ordered some orange carbon fibre tube from eBay which arrived today... I've made a new shroud for the Ghost Blaze. It's 100mm longer...

Having retired some years ago and having so much free time on my hands, I really needed to find something new try out. I've only ever...

You can scale it within bambu studio if you dont want to dive into cad software. To scale a model in Bambu Studio, select the object...

ok we have been getting issues with file storage etc and our file storage size is getting ridiculous well we have looked and the issue...

Can't go far wrong with Sunlu. I'm using almost exclusively Sunlu PLA+ 2.0 now on my P2S. About 20 rolls in and not had any issues...

Reply, thank you, I have done most of what you recommended 🤣, I have a P2S, I use two cryo plates and swap as one print is done and let...

1. What filaments do you use and why? I use mostly Jayo which is a sub brand of Sunlu. I buy it on AliExpress and print it with the...