• the Daily hi thread just say hi :)
  • Welcome to the UK's Most Active Airgun Forum

    Looking for expert advice on air rifles and shooting gear? You have found the internet's premier independent airgun forum. Our active shooting community shares daily technical insights on modular PCP air rifles, spring-powered rifles, air pistols, pellet testing, and optics setup. Whether you are troubleshooting an FX or Daystate regulator, discussing legal FAC requirements, planning a night vision hunting trip, or looking for pest control tips, our members are here to help.

Hot weather affect

Defo! Weather has an effect on most things. I was down the range over the weekend and did notice a difference in my shooting but i am putting that down to the range hut being like a greenhouse.
 
The amount of people i know including me that has filled up a rifle with a stirrup pump once and thought sod that i need to get an air cylinder or compressor.
 
Yes airguns and or scopes might alter a bit in higher temps, even in lower temps.

I just keep the airgun set up the same, ie I don't adj anything as I SHOULD be under the legal limit even in hot hot weather.
However, I DOUBLE check on days like this ie over 30c just in case.

I just simply knock off a few yards say 2 to 5 yards depending on the range that I'm shooting at, after say 25y that mostly works for me.
PCP.
 
Interestingly enough I went through the chrono at the same speed both days at the weekend.
My scope on the other hand, was a very different story with some interesting over ranging, 55 yds coming in at 60+
 
Yep, that's my experience with a PCP.
 
how do these new fangled computerised intergalactic scopes get on in the hot / cold / heat haze ?

im increasingly thinking i need one ,dunno nuffink about them though
 
My S510 core (so same barrel as the s410) needed three clicks right yesterday after it had warmed up. Same muzzle energy as ever though :)

how do these new fangled computerised intergalactic scopes get on in the hot / cold / heat haze ?
I have one on my caiman which is my main pesting gun and it is extremely stable

edit: sorry I should add this is a dnt zulus v1
 
Nothing escapes the effects of extreme hot or cold. Learning what your kit does is the key.
That goes for stocks, fixings, the gun, glass, everything including you. I believe the " beware the man with one gun" stems from this too. Only learning one setup is far easier than me trying to learn the quirks of 10 'comp guns' not plinkers.
 
Back
Top